How connectors can reduce jack and pin wear

When the connector is connected, the pin should be opened with absolute force, but it is easier to separate. Therefore, it is judged that the connection of the electrical connector is more than the strength of the separation.

Therefore, the interaction of the two forces of insertion and extraction can easily cause the connector to be worn out. If you want to cut the loss, look at the following good methods: You can improve the strength of the gold-plated layer that touches the exterior, which can effectively reduce conflicts. The touch surface can be nickel-plated and then gold-plated, which is less than the conflict between gold plating directly on copper.

1. The thicker the nickel layer, the stronger the wear resistance of the gold plating layer.

2. The more lubricated the appearance, the lower the roughness, so the conflicting force is small.

3. On the way to the normal connector, pay attention to the maintenance of the electrical connector and reduce the artificial damage to the electrical connector.

HYEC-Shanghai Huiyi Electronics, as a professional connector manufacturer, has been focusing on the development and sale of RF coaxial connectors for 20 years. It has accumulated rich technical experience and strength, and is now in the National Connector Mall. It has gained a good reputation, and the products have been developed in cooperation with Renyi's foreign trade team to make the products go to more than 40 countries and regions at home and abroad.

HYEC-Shanghai Huisheng Electronics Co., Ltd. was established in 1998, specializing in the development, production and sale of MICRO MINI BNC, BNC, BNC, TNC, N, UHF, MINI UHF, F, PAL, RCA, SOLDERLESS, FME, SMA, SMB , SSMB, SMZ (BT43), MCX, MMCX, 1.6-5.6 and 1.0-2.3 coaxial series, cable assemblies. Products are mainly used in communications, security monitoring, car, medical, aviation, military and other fields for data signal transmission.